E3 en

We present our new product VS230, an instrument that allows you to control the intensity and, by selecting one of the two modes, the vibration frequency of vibrating channels powered in 230V and mounted on the packaging lines. The regulation of the vibration intensity takes place through the 0-10V or , alternatively, through the 4-20mA input, while the frequency regulation takes place by selecting the 50/100 Hz or 60/120 Hz mode,

We present our new product VS148, an instrument that allows you to control both the intensity and the vibration frequency of vibrating channels powered in 48V and mounted on the packaging lines. The regulation of the vibration intensity takes place through the 0-10V or 4-20mA input, while the regulation of the frequency takes place through the appropriate trimmer. The instrument also has a MODBUS RS485 communication interface available, to be able to

Board developed for one of our customers that allows you to drive a 4.3 inch IPS display with 480x272 resolution.We list the features below: 24VDC power supplyEEPROM and FLASH memories32-BIT ARM-CORTEX M7 microcontrollerUSB interfaceBLE Bluetooth module interfaceEthernet interfaceN°3 RS485 serial interfaces for communication of keyboards, I/O boards and external devicesIsolated RS485 serial interface for connecting supervisory devicesN°3 configurable analog inputs 0-10V or 4-20mAN°2 external PTC temperature inputsInternal temperature sensorKeys for navigating

E3 staff

Hybrid inverter board designed for three-phase synchronous andasynchronous motors with powers up to 3.5 kW.The motor power comes from photovoltaic panels up to 400 VDC with automatic switching to mains power 110-230 VAC in case of insufficient energy coming from the photovoltaic panels.It also has the following features: configurable analog inputs 0-10V or 4-20mArelay output for alarm signalingdigital inputs for remote control of the plantisolated modbus 485 communication interfaces for connecting

This board is the updated version of the laser driver developed for our customer. It allows you to analyze the composition of gases (O2, CO2), with non-invasive and non-destructive laser spectroscopy techniques, inside containers for food and pharmaceutical products for quality controls.